Today Only YG1 86570TH 7/32″ Size, 3/4″ LOC, 5 Flute, Hardslick Solid Carbide Finishing End Mill

Applications

For detailed finishing tasks in stainless steel components, the YG1 86570TH 7/32″ diameter solid carbide end mill features a 3/4″ length of cut and five flutes. Its 45° helix angle, combined with the Hardslick coating, enhances chip evacuation and reduces built-up edge, resulting in improved finish quality and longer tool life when machining stainless steel and HRSA materials. This end mill’s geometry and coating make it ideal for finishing operations where maintaining smooth surface integrity is essential. With a high flute count and no corner radius, it supports light radial stock removal while minimizing edge chipping during continuous cuts. However, caution is advised when performing interrupted cuts to avoid premature tool wear. Due to coating unsuitability, this tool should not be used on steel (ISO P) or non-ferrous materials, as rapid tool failure may occur. It is specifically designed for finishing applications in stainless steel and HRSA alloys, offering reliable performance in these demanding environments.

Features

• Designed to machining stainless steel, inconels and other alloys.
• The new design of stub length allows cutting at maximum speeds and feeds with minimum deflection.
• 5 Flute and 45 degree medium helix allow harmonic balance and smooth cutting.