Luxury NIAGARA N52244 3/4″ Size, 1-5/8″ LOC, 6 Flute, Bright M42 8% Cobalt Square End Mill

Multiple Flute Single End Mill with Lower Helix Angle For Toughest Applications. The Niagara Cutter SPC 408 TiCN-coated and uncoated carbide end mill is general-purpose machining with four/six flutes design and a 30-degree helix angle. The tool’s flat end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, thus fed into the workpiece like a drill bit. The lower 30-degree helix angle wraps slowly and provides a strong cutting angle. It is thus best used on difficult-to-machine materials. End mills have cutting edges along the outside diameter and the flutes. It is designed such that the chips are removed while cooling fluids enter easily. The end mill’s multiple flutes design give a finer finish than single flute cutters. Models with Titanium Carbonitride (TiCN) coating offers lower friction coefficient in many applications. It offers enhanced abrasive wear resistance in harsh industrial conditions. The tool material made up of M42 high-speed steel. 8% Cobalt is added to increase the overall tool hardness. Niagara SPC 408 single end mill is available in different sizes ranging from 1/8 inch to 1-1/2 inch. The overall length of SPC 408 type single end mills are available in 8 different unusual lengths ranging from 2-5/16 inches to 4-1/2 inches. Niagara Cutter has specialized in designing and manufacturing end mills, cutting mills and saws, since 1954. The company is based in New York and has manufacturing facilities in Pennsylvania and Massachusetts. This allows the company to serve its customers in a variety of industries, especially aerospace and automotive.

Benefits

• M42 cobalt lasts longer than high speed steel.
• The 8% cobalt content ensures high edge hardness at elevated temperature levels.
• Center-cutting end mills can create three-dimensional shapes and profiles.
• Lower helix angle of 30° wraps slower and is optimized for the toughest roughing applications.
• Titanium Carbo-Nitride (TiCN) coating offers slightly higher hardness and primarily used to achieve enhanced abrasive wear resistance.
• Higher speeds & increased feeds.
• Great abrasive resistance.

Applications

• Designed for profiling in all materials.
• For milling the abrasive high strength and heat resistant exotic metals.
• For cutting difficult and abrasive materials, ranging from medium to the highest hardness level machinable by high speed steel.
• Single-end finishing mills are designed for basic machining operations including Peripheral, Ramping, Helical, Slotting, Plunging.
• Highly recommended for workpiece material range: Steel, Stainless Steel, Non-Ferrous, Cast Iron, Plastics.

Features

• Weldon flat standard.
• Tool made up of M42 HSS, 8% Cobalt.
• Multiple flute design, models available in 4 or 6 flutes.
• Right-hand cut, Right-hand spiral, general-purpose finishing end mill.
• Available in regular lengths with a lower helix angle (30°).
• Uncoated and coated variants with Titanium-CarboNitride (TiCN) are available.
• The round shank accommodates a variety of holders.
• Suitable for use with wax or liquid lubricants.
• CNC qualified.